Built to U.S. standards.
Delivered globally.

Travel-ready controls professionals for the contractors and integrators building U.S. embassies, military installations and federal hospitals — from installation and point-to-point checkout to programming, startup and Cx.

Federal work

we support, worldwide

U.S. Embassies
U.S. Consulates
Department of State facilities
Air Force installations
Military installations
USACE projects
NAVFAC projects
DHA hospitals
Medical facilities
International on-site support
  • 30+

    years implementing building systems across U.S. installations (CONUS)

  • 5

    regions we deploy to: Africa, Asia, Europe, the Middle East and South America

  • 2

    home bases — San Diego, California and Kraków, Poland

Why CPI

One standard,
Internationally.

U.S. Government projects abroad are specified to American criteria but built with host-nation products, permits and power. Most crews are fluent in one side. Ours work in both, from the first device to final commissioning.

See how we work

SPECIFIED IN THE U.S.

  • Federal installation standards & project specs

  • U.S. fire, life-safety & notification codes

  • Control-system cybersecurity requirements

  • English submittals, as-builts & O&M manuals

One team fluent in both

Install → Cx, on one crew

BUILT ABROAD

  • Host-nation products & local supply

  • Host-nation permits & inspections

  • Local voltages, frequencies and protocols

  • Crews on site, in any time zone

Capabilities

Install to Cx.
Travel-ready crews.

DDC/BMS, fire life safety, access control, CCTV and low-voltage systems installed, checked out, programmed and commissioned by the same travel-ready crew, on any federal project.

01 · CONTROL

Building automation & controls

  • DDC / BMS
  • PROGRAMMING
  • GRAPHICS
  • TECHNICAL SUPPORT
Explore
BLDG 104 · AHU-2 · SUPPLY FAN Normal Supply air 13.2 °C Return air 22.4 °C Fan speed 64 % Zone avg. 21.6 °C 00:00 06:00 12:00 18:00 NOW MICROGRID · NORTH CAMPUS Island-ready Solar PV 412 kW Battery storage 78 % Utility tie Closed SCADA · PUMP STATION 2 Online Polled 2 s ago · 48 points
  • DDC / BMS installation, programming and graphics

  • Advanced programming on JCI, Tridium, Siemens, Schneider and Distech

  • New build, retrofit or central-plant upgrade

02 · PROTECT

Fire life safety & security

  • FIRE LIFE SAFETY
  • ACCESS CONTROL
  • CCTV
  • ELECTRONIC SECURITY
Explore
EVENT LOG · ALL SYSTEMS FIRE ACCESS VIDEO MNS 06:42 Gate 3 — badge accepted, lane 2 Granted 06:44 Bldg 104 — fire alarm panel normal Normal 06:51 Mass notification — zone 2 test complete Test 07:02 Camera 18 — motion at north fence Review CAM 18 · NORTH FENCE REC MOTION 2026-10-28 · 07:02:14 ATFP · VEHICLE BARRIER 3 Secured Raised 06:40 · interlocked with Gate 3
  • Fire life safety, access control and CCTV from one crew

  • Devices installed, terminated and checked out end to end

  • Built to federal installation standards

03 · INSTALL

Installation & low-voltage systems

  • LOW-VOLTAGE SYSTEMS
  • INSTALLATION & ELECTRICAL
  • FEDERAL STANDARDS
Explore
BLDG 104 · FLOOR 2 · DEVICE MAP 97% wired VAV-07 AHU-2 FCU-4 DPS-14 CO2-31 VAV-02 TS-9 ZONE B · MECH ROOM OFFICE Field device Controller Install zone LOW-VOLTAGE · IDF-2 Online Core switch 62 % Access panels 18 / 18 MNS amplifiers 4 / 4 Control network Segmented INSTALL · PUNCH LIST Synced Closed 14 · open 0
  • Controllers, panels and field devices installed and wired

  • Electrical and low-voltage work alongside the controls scope

  • Federal installation standards, documented for submittal

04 · VERIFY

Checkout, startup & field support

  • POINT-TO-POINT
  • STARTUP & CX
  • FIELD STAFF
Explore
CX SCHEDULE · WEEK 44 4 scheduled P2P · AHU-2 points 1–48 TUE 08:00 Scheduled Startup · chiller plant WED 10:30 Scheduled Functional test · smoke dampers THU 09:00 Done Cx report · Bldg 104 FRI Ready POINTS VERIFIED / WEEK Tracked W33 W36 W39 W42 W44 FIELD SUPPORT · ON SITE Staffed Technicians on site through turnover
  • Point-to-point checkout and verification of every point

  • System startup and commissioning (Cx) support

  • Technical staff on site for the length of the job

Who we support

Your platform, your prime.
Our people on site.

We work as an extension of general contractors, MEP contractors and systems integrators on the platforms you already install and support, to your templates, sequences and submittals.

Johnson Controls
FX · METASYS · EASYIO
Honeywell
TRIDIUM
Siemens
DESIGO
Schneider Electric
BMS
Distech Controls
DISTRIBUTORS
Chinook Systems
INTEGRATOR

Cal Pacific field team

TRAVEL-READY · FEDERAL STANDARDS
Programmed to your spec
Federal installation standards
Point-to-point records for every point
Startup and Cx support to turnover
Staffed on site
Points verified
Ready for turnover
How we work

From first device
to final commissioning.

Take one phase or the whole scope. Our technicians join your team at any point and stay until every point is verified and the system is handed over.

Discuss a project
INSTALL
01

Deploy

Travel-ready technicians on site, wherever the project is.

02

Installation

Controllers, field devices and wiring installed to federal standards.

PROGRAM
03

Programming

Advanced programming of sequences on your platform.

04

Graphics

Operator graphics built and tied to live points.

05

Point-to-point

Every point checked out and verified, device to front end.

COMMISSION
06

Startup

Systems started up and sequences proven in operation.

07

Cx support

Commissioning support and technical help through turnover.

Recent projects

Embassies, consulates
and a naval hospital.

Recent work for Johnson Controls Federal Systems and Chinook Systems in Europe and the Middle East — from DDC programming to full installation, point-to-point checkout, startup and Cx.

Discuss a project
PL
Warsaw, Poland
2026

U.S. Embassy Warsaw

Client
Chinook Systems
Scope
MECHANICAL RETROFITS
DDC INSTALLATION
GRAPHICS
POINT-TO-POINT
STARTUP
CX
In progress
‍
IT
Naples, Italy
2026

NSA Naples Hospital Central Plant

Client
Johnson Controls Federal Systems
Scope
DDC INSTALLATION
PROGRAMMING
POINT-TO-POINT
STARTUP
CX
Phase 1 · chiller plant upgrade
‍
LB
Beirut, Lebanon
2026

U.S. Embassy Beirut

Client
Johnson Controls Federal Systems
Scope
DDC PROGRAMMING
‍
IQ
Erbil, Iraq
2025

U.S. Consulate General Erbil

Client
Johnson Controls Federal Systems
Scope
DDC PROGRAMMING
POINT-TO-POINT
STARTUP
CX
‍
Presence

Two home bases.
One standard.

Cal Pacific Industries, Inc. in California and Cal Pacific Industries Sp. z o.o. in Poland put travel-ready controls professionals within reach of U.S. Government projects worldwide.

USA

Cal Pacific Industries, Inc.

San Diego, California

U.S. leadership, engineering heritage and U.S. contracting.

POLAND

Cal Pacific Industries Sp. z o.o.

Kraków, Poland

European operations — registered in Poland since 2016 (KRS 0000652179).

WORLDWIDE

Ready to deploy

Africa · Asia · Europe · Middle East · South America

Embassies, consulates, military installations and federal hospitals, wherever the project is.

Leadership

Led by people who’ve
built this before.

Our leaders have run controls companies, branch operations and systems on installations across the continental U.S. for more than three decades.

Steven Cabaj

VP Operations

ECS
Albireo Energy
ETS

Hector Lizarraga

VP, SALES & MARKETING

general atomics
Siemens
ECS
GTS
Albireo Energy

Mark Cabaj

Senior Sales Engineer

GTS
ECS
Albireo Energy
CLImatec
BOSCH Building technologies

Zbigniew Cabaj

‍President

Albireo Energy
Electronic Control Systems
Siemens
For contracting officers & primes

Contract-ready
from day one.

Entities, NAICS codes and points of contact in one place — plus a capability statement you can drop straight into a source-selection file.

COMPANY DATA · CAL PACIFIC INDUSTRIES
UPDATED 2026
Legal entities
Cal Pacific Industries, Inc. — USA
Cal Pacific Industries Sp. z o.o. — Poland · KRS 0000652179
NAICS codes
238210
Electrical & building-automation contractors
238220
HVAC contractors
238290
Other building equipment contractors
541330
Engineering & design services
541511
Custom computer programming
541690
Technical & energy consulting
561210
Facilities support services
Offices
San Diego, California  ·  Kraków, Poland
Points of contact
info@cpind.us
Licenses & certs
Listed in the capability statement
FAQ

Questions,
answered plainly.

Can’t find yours? Write to us and a senior team member will answer.

info@cpind.us
Where can you work?

On U.S. Government projects worldwide, embassies and consulates, Department of State facilities, Air Force and other military installations, USACE and NAVFAC projects, and DHA hospitals and medical facilities throughout Africa, Asia, Europe, the Middle East and South America.

Who do you work for?

General contractors, MEP contractors and systems integrators. We work under your contract and to your standards, as an extension of your team on site.

Which platforms do you work on?

Johnson Controls (FX, Metasys, EasyIO), Honeywell (Tridium), Siemens (Desigo), Schneider Electric and Distech alongside the integrators and distributors who sell them, including Chinook Systems.

Can you take one phase, or only the whole scope?

Either. We install, run point-to-point checkout, program, build graphics, start up systems and support Cx as the full scope or as technical staff for any single phase.

Where are you based?

San Diego, California and Kraków, Poland. Our technicians travel to wherever the project is.

Which NAICS codes do you work under?

238210, 238220, 238290, 541330, 541511, 541690 and 561210 — all listed in our capability statement.

Need travel-ready controls professionals on site?

Send us the drawings, the points list or just the problem. We’ll reply as soon as possible.